aero2

Actuator Sizing Guide

This configurator provides actuator sizing, model number and a reference table for aero2 pneumatic actuators.

Actuator selection provides a minimum of 20% safety factor on Spring Return Actuators.

This is a guide only. Please refer to the SVF Product Technical Brochure for verification.

Step 1. Enter the Valve Torque (in-lbf)>>:

Step2. Select Media (Safety Factor):

MEDIA

SAFETY FACTOR

Basic Value

1.0

(The new Valve Torque will

Slurry

1.8

be calculated below)

Paste/Paint

1.8

Dry Gas

1.3

Gas / Dirty

1.5

Oxygen / Chlorine

1.5

Step 2. Select the Safety Factor from this drop down menu >>:

Based on your data, the Valve Torque with the Safety Factor is (in-lbf):

aero2 Q-Watermark For Data Sheets copy.gif

Download the aero2 Actuator Data Sheet

Contact SVF Flow Controls for additional information.

DOUBLE ACTING - 80 PSI AIR SUPPLY

aero2 Model Number:

Min. Output Torque:

in-lbf

SVF aero2 Part #:

DOUBLE ACTING - 60 PSI AIR SUPPLY

aero2 , SB9

aero2 Model Number:

Min. Output Torque:

in-lbf

SVF aero2 Part #:

SPRING RETURN - 80 PSI AIR SUPPLY

aero2 Model Number:

Min. Output Torque:

in-lbf

aero2 , B41 Rev3

Number of Springs:

SVF aero2 Part #:

SPRING RETURN - 60 PSI AIR SUPPLY

aero2 Model Number:

Min. Output Torque:

in-lbf

Number of Springs:

SVF aero2 Part #:

aero2 , H762

[This is to test whether you are a human visitor and to prevent automated spam submissions.]

Enter the Number as displayed below

Please fill all required fields